Geotechnical Drilling Supplies/Soil Sample And Rock Sample Drilling And SPT Test Machine
Introduction to Crawler Mounted Drill Rig
Geological Core Sample Drilling Rig / Small Bore Well Drilling Rig is a new type of vertical spindle machine manufactured by Glorytek Industry which a diesel engine or motor may be chosen as power. It is primarily used with diamond drill bit or carbide drill bit for the
drilling in solid mineral deposit as well as those in engineering geotectonic survey, foundation pile hole and water well hole.
1.The Crawler Mounted Drill Rig Information:
| Drilling Depth: |
100m,70m,50m,30m |
| The Hole Diameter |
75mm,91mm,110mm |
| Kelly |
52*59*4200mm |
| Drill Pipe Diameter |
42mm |
| Drilling Angle |
90°-75° |
| Rig Dimensions(Length*Width*Height) |
1640mm*1030mm*1440mm |
| Weight (excluding power) |
500kg |
| Swivel Head |
| Spindle speed(3-speed) |
142/285/570 r/min |
| Spindle stroke |
450 |
|
upward displacement speed
of idling vertical spindle
|
0.05m/s |
|
Downward displacement speed
of idling vertical spindle
|
0.067m/s |
| Spindle pull-down max |
15KN |
| Spindle lifting capacity max |
25KN |
| Gyrator |
| The Vertical Speed (fore steps) |
71,142,310,620 r/min |
| The Vertical Stroke |
450mm |
| The Maximum Speed Of Vertical Load |
0.05m/s |
| The Vertical Load Down The Maximum Moving Speed |
0.067m/s |
| Max Feeding Force |
15KN |
| Max Lifting |
25KN |
| The Vertical Maximum Moving Speed |
1.25 KN.M |
| Hoist |
| Max.lifting capacity(1-speed,single rope) |
10KN |
| Cable volume (number) of hoisting drum |
27m |
| Wire rope dia. |
9.3mm |
| Mud Pump |
| Types |
Horizontal reciprocating single-acting piston pump |
| Displacement max |
95 L/min |
| Equipped with motor |
77 L/min |
| Allowable working pressure max |
1. 2Mpa |
| Continuous working pressure |
0.7Mpa |
| Suction pipe dia |
32mm |
| Discharge pipe dia |
25mm |
The rig has the following characteristics
1. A reasonable range of rotation speed is selected. The rotation speed is divided into eight stages, with centralized speed change and mutual self-locking. It is suitable for drilling rig sampling and pile hole construction.
2. The rig has two reverse speeds, which is convenient to handle faults safely.
3. The rotary chuck adopts the manual ball chuck, which is reliable in clamping, does not damage the active drill pipe, and can reverse the rod without stopping.
4. Oil pressure feeding, easy operation, high drilling efficiency and low labor intensity.
5. The control handle is less, the layout is reasonable, and the operation is flexible and reliable.
6. The double disc normally closed friction clutch is adopted, which is flexible in opening and closing, and easy to adjust and use. Equipped with fore-and-aft moving oil cylinder, the rotator moves 465mm backward, which brings a lot of convenience to the following drilling tools.
7. The drilling rig is light in weight, compact in structure and convenient in assembly and disassembly. It is suitable for drilling in hilly or
mountainous areas.
1. Compact mechanical transmission structure, lightweight, vertical spindle for large through hole diameter with hexagonal drive
drilling rod, ensured torque transmission.
2. Higher rotating speed and rational , adaptable for the drillings with small diameter diamond drill bit or large diameter
carbide drill bit and other engineering hole drillings.
3. During the hydraulic controlled feeding process, both the pressure and speed of feeding can be regulated to meet the
requirements of different stratum drillings.
4. Less and centralized handles, easy operation.
Jinzhou Shitan Machinery Equipment Co., Ltd. Main Products：
Pneumatic Drilling Rig / Air Drilling Rig（ST-180,ST-200,ST-260,ST-300,ST-350,ST-400,ST450,ST-450,ST-500, ST-600,ST-800 and other Pneumatic water well drilling Rigs.）, Crawler Water Well Drilling Rig / Trailer Mounted Drilling Rig / Water Well Drilling Rig / Hydraulic Borewell Machine / Hard Rock Drilling Equipment / Diamond Core Drill Rig / Geological Drilling Rig / Soil Testing Drilling Rig / Portable Water Well Drilling Rig（ST-30，ST-50，XY-1A, XY-1B, XY-2, XY-2B,GK180, GK200, GY150, GY200 and 30 impact drill rig,ZLJ series tunnel drilling rig and other geological drilling machines）Crawler Track Undercarriage, Drilling Mud Pump（BW150,BW160,BW200,BW250,BW850 series Drilling mud pumps）, Drilling Air Compressor, Water Well Drill Bits（PDC Drill Bit， Tricone Bit， DTH Button Bit）, Water Well Drill Pipe, Drilling Rig Spare Parts( drilling rods , drilling rods joint , casing pipe, casing coupling, core tube, core tube coupling, lifters, automatic drop hammer, sampler, SPT tool, wrench fork, pad fork, lock joint), Track Transporter
Good quality, professional after-sales service, welcome to order
Product Tags:
|
|
Soil Sample And Rock Sample Drilling SPT Test Machine Images
|
